Iron & Steel

MILD STEEL ROLLED PRODUCTS

Mild steel is the least expensive of all steel and the most common steel used. Used in nearly every type of product created from steel, it is weldable, very hard, and very durable although it easily rusts, Containing a maximum of 0.29% carbon, this type of steel can be magnetized and used in almost any project that requires a vast amount of metal.

DUCTILE IRON FITTINGS

There are various processes by which metal can be shaped such as forging, extrusions, pressing, welding, rolling, and costing. Among the various processes, casting is the simplest and most widely used in industry. It is a technology by which any complicated shape can be given.

SPONGE IRON PLANT

Sponge iron is the product created when iron ore is reduced to metallic iron, usually with some kind of carbon (charcoal, etc), at temperatures below the melting point of iron. This results in a spongy mass, sometimes called a bloom, consisting of a mix of incandescent wrought iron and slag.

TMT BARS PROJECT

Thermal Mechanical Treatment (TMT) process for reinforcement bars is opening up new vistas in composite RCC, the re-enforcing steel is the costliest constituent (30 to 40% Per Cu. M. of concrete). This cost can be substantially reduced by using higher grades of steel reinforcing bars.

FUSION BONDED EPOXY COATED TMT REBARS

Steel is one such material that has played an important role in the development of mankind in the last century. Today, it is difficult to imagine a world without steel. Steel has become vital to our everyday life. It is at the root of the quality of life that each of us enjoys today, helping to shelter us,

STEEL PROJECT (IRON, SPONGE IRON TO BILLET TO RODS)

Steel is the most widely used material in a large variety of applications both simple and sophisticated. Steel is produced through two process routes; the ore-based blast furnace LD converter route, scrap, or DRI-based electric arc flame route.

STITCHING WIRE

Stitch wire is used for stitching cardboard cartons/boxes in stitching paper notebooks, books, paper boxes, etc. this is a product, which enjoys a large demand in industrial areas. Stitch wire is produced from standard wire rods of mild steel drawing to thin gadgets of wires of the circular cross-section followed by flattening.

HOT DIP GALVANIZING PLANT

Hot dip galvanizing is a process in which an adherent, protective coating of zinc compounds is developed on the surface of iron and steel products by immersing them in a bath of molten zinc. The protective coatings usually consist of several layers.

COLD ROLLED STAINLESS STEEL PLANT FROM HR TO CR

Stainless steel today is an ideal base material for a host of commercial applications due to its resistance to corrosion and staining, low maintenance, relatively low cost, and familiar luster. Its application is increasing day by day. Stainless steel being skin-friendly, its uses in day-to-day life has been expanding rapidly.

FORGING ON OPEN DIE HAMMERS

Forging is the name for processes whereby the workpiece is shaped by compressive forces applied through various dies and tools. It is one of the oldest metalworking operations. Forging was first used to make jewelry, coins, and various implements by hammering metal with tools made of stone.

STEEL FABRICATION UNIT

The importance of iron & steel among other materials is well known for industrialization and the national economy. Metal fabrication is the group of entire processes employed to shape the metals into the desired form by melting & casting down to hot/cold working, joining by welding, and brazing.

FORGING UNIT FOR AUTOMOBILE SPARE PARTS

The forging industry as it is known today, make use of various type of forging equipment for the practical duplication of forged part for commercial use services. The era of modern growth in India has its first footprint on the automobile industry. A new model of car, a scooter.

GALVANIZED IRON WIRE

The production of G.I. Wire from H.B. wire is not complicated. In the case of H.B. wire drawing from H.B. bars, a certain mechanical process is used. An important difference between bar drawing and wire drawing is that the bars must remain straight. The length of the bars can be drawn.

CRANE HOOKS AND OTHER FORGED PRODUCTS (SUSPENSION PART, SUSPENSION SHAFT, SAFETY LATCH)

A lifting hook comprises a suspension part fitted with a suspension shaft, which supports a hook part provided with a slot. A safety latch is pivotally journalled in the hook part. When the safety latch is swung down, the suspension shaft moves into said end portion, whereby the safety latch is locked.

OCTG TUBE AND FITTINGS

Piping may represent as much as 25 percent of the cost of a chemical-process plant. The installed cost of piping systems varies widely with the materials of construction and the complexity of the system. The economics also depends heavily on the pipe size and fabrication techniques employed.

MILD STEEL INGOTS FROM IRON ORE

Castings of suitable shape and size intended for subsequent hot working are termed ingots. Ingot iron has very low carbon in the steel. This is generally made in the open hearth in which all the other elements are removed to the maximum extent possible.

STEEL STRUCTURAL

The importance of iron and steel among other materials is well known for industrialization and the national economy. All industries depend on iron & steel for their structural, machinery & raw material requirements.

IRON ORE PELLETIZATION PLANT

Iron ore pellets are used in blast furnaces for producing sponge iron & steels. Marked by high productivity lower fuel consumption and improved furnace control pellets are now preferred all over the world for primary steel making.

HIGH MAST POLES

High mast poles are newly ventured high pillars for using high mast lighting, floodlighting, sports lighting, traffic signals, street lighting, etc. It is a machine-made or molded product. It is manufactured by an M.S. plate with a galvanized uniform coat. It has now a large growing market.

STEEL ROLLING MILL

The chief departments of a metallurgical plant operating on to finished product cycle are the blast furnace, steel making, and rolling departments. The finished product of such a plant is rolled stock for various purposes.

ERW STEEL CONDUIT PIPES (BLACK PIPES)

Conduit pipe is a product through which electric wiring is passed to keep it safe. It is manufactured from hot rolled or cold rolled sheets. It is used in the cycle industry and for lower-end applications such as plumbing, irrigation projects, and low fluid pressure applications.

PIG IRON

Pig Iron is a raw material for all iron and steel-based industries and hence, is required to be responsive to the requirements of pig iron users. Pig iron as hot metal goes to the integrated steel-making plant for refining and conversion into steel of various types to cater to downstream industries like Hot Rolling Mills.

COLD ROLLING OF MILD STEEL STRIPS & SHEETS

When a metal is rolled, extruded, or drawn at a temperature below the recrystallization, the metal is cold worked. The cold rolling mills use hot rolled strips as their raw materials in widths according to the full sizes. Cold rolled M.S. strips find uses in various types of downstream industries such as in rolling shutters.

HIGH TENSILE FASTENERS

Industrial fasteners have a vital contribution to the growth of almost all sectors of industry. It is a wonderful manifestation that joins & secures materials together for any productive uses. A fastener is a connective mechanism that mechanically joins or affixes two or more objects together.

SAW (SPIRAL & LONGITUDINAL) PIPES (MOBILE PLANT)

SAW pipe is a Submerged Arc Welded pipe. They are the pipes formed by the process called Submerged Arc welding. There can be two types of SAW pipes: 1. LSAW-Longitudinal SAW and 2. HSAW -Helical SAW. (aka Spiral SAW).

COLD ROLLED SHEET MILL

Cold Rolled Coils and Sheets are produced through the cutting-edge Cold Rolling Mill. The Cold Rolling Mills are used for pressing the alloy steel and shaping it into strips, coils, and sheet form. Their application is in galvanizing and enamelware industry and is used as basic material for making tin mill black plate food cans in the food and beverage industry.

BUTT WELDED CARBON STEEL FITTING AND STEEL FLANGES

Butt welded steel pipe fittings are extensively used in a piping system to change direction or function which is mechanically used in the system. The main types of fittings are various types of elbows, bends, reducers, crosses, caps, etc. A pipe fitting is defined as a part used in a piping system to change direction or function,

SS SHEET ROLLING

Rolling allows sheet metal to be formed into cylindrical shapes. This gives us the ability to make tanks, cylinders, bands, and virtually anything that requires a rolled rounded form. We can roll sheet metal, angle iron, channels, and flat bar.

ERW STEEL PIPES

Electric Resistance Welded Pipe is also known as ERW pipe and it is made of strips of steel that are hot rolled and passed through forming rolls and finally welded together. It is used for usually high diameters. ERW steel tubes are comparatively economical and possess high dimensional accuracy.

TRANSMISSION TOWERS & TELE COMMUNICATION TOWERS WITH GALVANIZING PLANT

A transmission tower is a tall structure, usually, a steel lattice tower used to support an overhead power line.

NUTS AND BOLTS

Nuts and Bolts are the most commonly used items in the family of industrial fasteners and their demand is fast increasing due to the expansion of industries in the world. A bolt is a piece of a metal rod whose one end is upset and at the other end, threading is done. The nut is a device, which rolls on these threads.

CAST IRON EARTH PIPES WITH FLANGES

Most of the old Cast Iron pipes are cast vertically but this type has been largely superseded by spun iron type manufactured up to a diameter of 900 mm. Though the cast iron pipe has the disadvantages of heavy weight, and consequent high transport costs, short length.

NEEDLES FOR SEWING MACHINE

A sewing machine needle consists of a shank clamped by the sewing machines needle holder shoulder where the thick shank tapers down to the shaft at a length suitable for driving the eye and thread through the material and down to the bobbin groove cut in the back of the shaft to release the thread into a loop that aids the hook.

STAINLESS STEEL TUBES & PIPES BY EXTRUSION AND PILFERING PROCESS

Stainless Steel is a common name for metal alloys that consist of 10.5% or more Chromium (Cr) and more than 50% Iron (Fe). Although it is called stainless a better term for it is highly stain resistant. Adding chromium to low-carbon steel gives it stain resistance.

SURGICAL BLADE & DISPOSABLE SCALPEL scalpel is a small but extremely sharp knife used for surgery, anatomical dissection, and various arts and crafts. Scalpels may be disposable or reusable. Scalpel blades are usually of hardened and tempered steel. Surgical scalpels consist of two parts, a blade, and a handle.

STEEL BAR

Steel is said to be the backbone of any national economy. In India SAIL units in the public sector and TISCO in the private sector are the integrated steel plants producing primary steel, using ore as the input material. They cover around 50% of the total steel requirement.

SEAMLESS TUBES

The manufacturing of steel tubes and pipes is a large-scale engineering industry. Mild steel demand as raw material for pipe and tube manufacturing units is fully met by indigenous sources. Seamless tubes have a variety of uses.

ALLOY STEEL CASTING

Alloy steel casting has valuable properties like strength, toughness, and resistance to heavy and repeated impact, excellent ductility, resistance to corrosion, easy machinability. Its versatile cast ability makes possible sound castings. There is a range of applications.